Регистрация: 1 год, 1 месяц назад
Introduction to Panic Alarms
The aim of a panic alarm is to permit an individual under duress to quickly and silently call for assist in the occasion of an emergency. Panic alarms are additionally called "duress alarms", "hold-up alarms", or "panic buttons".
Panic alarms are used when it may be unsafe or uncomfortable to call for help in other ways. For instance, if a belligerent person is standing in your lobby, it could also be unwise to additional escalate the situation by picking up a phone to call for assistance. A panic alarm can provide a quick and convenient way to summon assist without drawing attention.
Silva Consultants feels that nearly each enterprise can benefit from the use of panic alarms. Locations the place panic alarms may be particularly useful include:
Receptionist's desks in building lobbies.
Security stations and checkpoints.
Customer service counters.
Check-out counters and cashier's stations.
Rooms where cash or other valuables are acquired, processed, or stored.
Interview rooms in Human Resources department.
Executive office suites.
Locations the place confrontations with the general public are likely to occur.
Components of a Panic Alarm System
Panic alarms consist of two primary parts:
The panic button is the device that the particular person activates when he or she needs help. There are lots of styles of panic buttons available. These can have a single pushbutton, pushbuttons that have to be pressed concurrently, devices that should be squeezed, and devices which might be activated by a foot or knee. There are also gadgets that may be covertly activated when cash or a product is removed on the request of a robber. Most panic buttons are specifically designed to resist unintended activation.
Panic buttons are normally put in in a location where they will easily be reached, yet out of view of the informal observer. In many cases, panic buttons are installed on the underside of a desk or counter-top.
Panic buttons might be the wired type or wireless type. Wired panic buttons are related using cabling. Wired panic buttons are very reliable, but it can sometimes be troublesome and expensive to get cable to every panic button location.
Wireless panic buttons use a brief-range radio transmitter, much like that used with a garage door opener. Wireless panic buttons are simple to install and may be placed just about anywhere. Wireless panic buttons will also be carried around on the premises by employees if desired. Wireless panic buttons require batteries and must be tested incessantly to guarantee that they are working properly.
The communications system is the strategy that's used to summon assist when a panic button is pressed. The type of communications system used depends largely on the resources available on the facility the place the panic alarm is being installed and the level of security threat.
Types of communications systems used can embody:
Communications to an off-site alarm monitoring middle:
This methodology would typically be used at facilities that wouldn't have an on-site security employees, comparable to at a small business. The panic buttons could be linked to an alarm management panel which sends a signal to the monitoring center when a panic button is pressed. The alarm monitoring center would then call the police or different appropriate folks to reply to the site.
Communications to security management center:
Most large corporations have some type of centralized security monitoring and management center, either on-site, or at a central location somewhere within their organization. When this type of resource exists, panic buttons are typically monitored on the control center. Most frequently, panic buttons are connected to the group's access control and security management system, which transmits the alarm to the management center.
When a panic button is pressed, it sounds an alarm in the security management center. The center would then dispatch local security officers and/or the police to reply to the site.
Communications to non-security personnel:
Some organizations that wouldn't have on-site security choose to inform non-security personnel when a panic button is pressed. Usually, the organization will type a "response group" consisting of staff from multiple departments (Facilities, HR, etc.) and ask that these workers reply when a panic button is pressed.
There are numerous systems that can be used to notify the response team when a panic button has been pressed. These include can embody overhead paging systems and units that send voice messages, text messages, or electronic mail messages directly to smartphones.
When you have almost any inquiries regarding exactly where along with how you can use How a workplace call button works, you'll be able to call us in our webpage.
Тем начато: 0
Ответов написано: 0
Роль форума: Участник